In this joinery detail we join a post to a beam with a Timberlinx A095 Connector. There is a stub tenon to act as a locator and to ensure you cannot see through the beam and post after the timber […]
Timberlinx A095 – Post and Beam Connector Read More »
18″ Insertion Tool For use with large timbers and logs Made from solid machine steel Designed to fit over the machine bolt head Applies force to end of castings so pins can be inserted without expanding Download Common Joint Configurations
Timberlinx 18″ Insertion Tool – W0118 Read More »
18″ Positioning Tool For use with large timbers and logs Made from solid machine steel Designed to fit over the machine bolt head Applies force to end of castings so pins can be inserted without expanding Sold in Pairs Download
Timberlinx 18″ Positioning Tool – W0P18 Read More »
Insertion Tool Made from solid machine steel Designed to fit over machine bolt head Applies force to end of castings so pins can be inserted without expanding Download Common Joint Configurations Download the Installation Manual Download the CCMC Engineering Report
Timberlinx Insertion Tool – W0011 Read More »
Positioning Tool Made from solid machine steel Helps to position slots exactly for insertion of pins Brings joints into position and holds them there Designed to fit in the end of pipe for insertion Sold in Pairs Download Common Joint
Timberlinx Positioning Tool – W0010 Read More »
4.75″ Pipe. ‘Half-connector’ with one pin at one end One slot with 7/8″ internal thread at other end Overall length 4-3/4″ Pin hole center from end of timber =3-7/8″ (when connecting post to concrete and post to steel) Pin hole
Timberlinx Threaded Connector – A475SS Read More »
9.5″ Pipe. Connector pins parallel A095SS straight slots Overall length 9.5″ Pinhole center to center 7-3/4″ APPLICATIONS FOR A095SS Used in all general joining applications from wood dimensions 6″x4″ and up This is the connector used for all official testing
Timberlinx Threaded Connector – A095SS Read More »
17.5″ Pipe. Connector pins parallel A175 slots at 90º Overall length 17.5″ Pin hole center to center 15-3/4″ APPLICATIONS FOR A155 Designed to join two beams to one post (one TIMBERLINX for two joints) 8″x8″ dimensional timber butt joints at
Timberlinx Threaded Connector – A175 Read More »
17.5″ Pipe. Connector pins at right angle B175 slots at 90º Overall length 17.5″ Pin hole center to center 15-3/4″ APPLICATIONS FOR B155 Designed to join two beams to one post (one TIMBERLINX for two joints) 8″x8″ dimensional timber butt
Timberlinx Threaded Connector – B175 Read More »
15.5″ Pipe. Connector pins parallel A155 straight slots Overall length 15.5″ Pin hole center to center 13-3/4″ APPLICATIONS FOR A155 Designed to join 2 beams to a post (1 TIMBERLINX for 2 joints) 6″x6″ dimensional timber butt joints at the
Timberlinx Threaded Connector – A155 Read More »
