Wood Storage Shed Plans

This 6×10 wood storage shed is the perfect size to house many different landscape items – from firewood to lawn mowers and snow blowers, there is plenty of roof coverage for protection while the cut back side walls maintain good airflow. Leave the sides open for firewood, or sheath with your choice of siding for equipment storage.

The traditional saltbox design creates an attractive asymmetrical design – the front plate is a bit over 8’h, while the back plate is 7’6” h. The roof pitches vary as well, with 10 in 12 on the front, and 6 in 12 at the rear. This design includes a timbered floor system which creates a completely freestanding structure.

This design utilizes are 6x and 4x lumber which is economical and makes for an easier raising.

This plan set consists of 31 pages formatted to letter size paper for easy printing from home or your neighborhood copy shop. The drawings include fully dimensioned 2D plans, sections and elevations. We include 3D drawings so you can really picture what the final product will look like. Every face of each timber is drawn in 2D, with every cut fully dimensioned. We show you every detail, to take the guesswork out of cutting and raising this frame! We also include a complete timber list and fastener schedule, to make your budgeting and purchasing easy!

Download Sample Plan

Plan Guarantee

Important Information:

Purchaser agrees that the use of the plan is for the construction of one house or frame only*, and that the plan or any part of it will not be reproduced by any means without the written consent of the copyright owner.

Timber Frame HQ provides plans for construction purposes but does not oversee the construction. The plan purchaser is responsible for assuring the plan meets local codes and regulations. It is the responsibility of the plan purchaser to obtain any and all structural analysis, engineering and specifications that may be required in the municipality in which it is to be built. Plan purchaser is to verify all lot conditions and measurements before construction. Purchaser is responsible for additional expenses incurred in order to meet local code and engineering requirements.

Customer understands that the following conditions in your specific area may require additional engineering:

  1. Wind / hurricane / tornado
  2. Seismic / earthquake
  3. Heavy snow
  4. Flood potential
  5. Soil instability
  6. Timber Frame Engineering

Customer understands that HVAC, Plumbing & Electrical will not be included in all plans.
Purchaser agrees that the use of the plan is for the construction of one house or frame only*, and that the plan or any part of it will not be reproduced by any means without the written consent of the copyright owner.

4 thoughts on “Wood Storage Shed Plans”

  1. Richard T Rogers

    are the measurements center of post to center of post? or outside of post to outside of post? or eave to eave? or ?

    What does a 6′ x 10′ really mean?

    is it true that I can spend $47 for this one plan or $147 for 50 plans, including this one? Seems too good to be true. If you buy all 50 do you only get to download one plan?

    thanks.

    1. Brice Cochran

      The measurements are outside to outside of the posts. Yes you are right if you purchase the plan bundle you get access to a private page on the site where you can download all the plans that TFHQ has created.

  2. looking at possibly placing this on a slab. what kind of connection would you use or recommend for the floor braces to concrete slab?

Leave a Comment

Your email address will not be published. Required fields are marked *