Traditional timber framing relies on mortise and tenon joinery, a connection so time-tested that it has held structures together for centuries without a single piece of metal. But there are situations where wood alone simply can’t carry the load, particularly […]
Post to Beam Connection with an All Thread Rod Read More »
English tying joints are a hallmark of historic British timber framing, serving as crucial connections that bind a building’s primary structural members. Found in medieval barns, churches, and manor houses, the joints use carefully fitted mortise-and-tenon (and occasionally dovetail) connections
Modified English Tying Joint Read More »
The King Post Truss to Plate Connection is a crucial structural element in timber framing. The bottom chord is joined to the rafter using a traditional mortise and tenon joint at the point where the rafter meets the plate. This
King Post Truss to Plate Connection Read More »
The “1” diminished housing joint is a specific type of mortise and tenon joint used primarily in timber framing. It involves a tenon (the projecting piece of wood) that fits into a mortise (the cavity) cut into another timber. The
Mortise and Tenon With A Diminished Housing Read More »
When two plates or beams come together into the same plane on a post, there is often not enough thickness in the post for each plate to connect to it with a tenon. If you put a tenon on
Jump to: Version 1, Interactive 3d Model, Version 2 This king post with steel all thread uses a bit of hidden modern technology to strengthen the joinery and avoid taking too much “meat” from the timbers. A king post truss
King Post with Steel All Thread Read More »
The hammer beam truss is more complex than the other types of trusses, but it allows for larger spans with shorter pieces of timber. Here we will take a look at the joinery of the hammer beam to hammer post in particular.
Hammer Beam to Hammer Post Read More »
When you have two beams connecting into one post at the same height, you need to get creative in cutting the joints. The goal here is to make a secure connection without taking too much meat and strength out of the post. In this detail we show you how to accomplish that with an Offset Mortise and Tenon.
Offset Mortise and Tenon Read More »
Anyone interested in timber framing should be familiar with Tedd Benson’s first book. Published in 1980, it became the Bible for timber framers, and there’s a lot of useful information. Since then, timber framing has come a long way in terms of the available tools…
Fitting Up A Knee Brace Read More »
It is a common occurrence in a timber framed structure to have two beams meeting at a single post. This can create conflicts with the joinery. A corner joint with screws is one solution to this problem. In order to
Corner Joint With Screws Read More »
Hudson Hart Hudson J Hart is Co-CEO (along with Mike Larson) of Big Timberworks, Inc., in Gallatin Gateway, Montana. Hudson describes Big Timberworks (or as Hudson calls it, BT) as “a group of talented craftsmen & craftswomen. We enjoy the
Spotlight: Hudson J Hart and Big Timberworks, Inc. Read More »
The 7.8-amp, 4 3⁄4 inch Makita 9741 wheel sander ramps up to 3,500 RPM and delivers professional-grade timber cleaning and grain raising tasks. The strategic design allows woodworkers to negotiate deep corners as well. Makita didn’t appear to be
Tool Review: Makita 9741 Wheel Sander Read More »
