Raisings

Project Information Designer/Architect: Nick Guilbeau Wood Species: Yellow pine Timber Framer: Nick Guilbeau Project Location: Leesville, South Carolina 20×32 main building with 12×32 enclosed lean to

Project Information Designer/Architect: Graham Barrett Photographer: Graham Barrett Timber Framer: Graham Barrett Wood Species: Douglas Fir First DIY timber frame project. Used Douglas Fir supplied from a local woodyard (East Brothers). Constructed and erected the timber frame using cedar shingles

Project Information Company: Big Woods Timber Frames, LLC Wood Species: Hemlock/ Pine Timber Framer: Brandon Pipher Project Location: Harford, PA The relocation and restoration of a 1890’s log cabin. The first and second courses were rotted and needed replaced from

Project Information Company: Earthwind Construction Designer/Architect: Leif Sayvetz Sketchup draughtsman Timber Framer: Chip Sills; with crew members Luke Bair, Evan Blumenstein, Clay Condon, and Leif Sayvetz Project Location: Pence Springs, West Virginia Wood Species: White Pine, White Oak and Douglas

This frame was a lot of fun to Raise. We came to call this frame simply the “pool pavilion”
Because it was built over an existing pool. With the hammer beam trusses, 30 ft spans and three gable design including a glue-lam ridge it was also fun to design as well.

Project Information Company: Jeffrey Kelley Custom Woodworking Designer/Architect: A. Maltese Design Photographer: Jeff Kelley Timber Framer: Jeff Kelley Builder: Maine Home Networking Project Location: South Bristol, Maine Wood Species: Western Red Cedar, Douglas Fir A little 11’ x 13’ gazebo

Project Information Designer/Architect: Timber Frame HQ and Louis Storms Timber Framer: Louis Storms Youtube Videos: Link here Project Location: Houston, Texas Wood Species: Cedar Posts, Ties, Braces & Rafters, Doug Fir Plates. DIY 12×24 timber frame outdoor kitchen for my

Project Information Designer/Architect: Michael Merrigan Photographer: Michael Merrigan Timber Framer: Michael Merrigan Project Location: Hampton, Nova Scotia, Canada Wood Species: White Spruce Timbers, ash pegs Project Description: 1st floor – 12′ x 16′, 8″ x 10″ sills, 6″ X 6″

Project Information Company: Big Woods Timber Frames, LLC Wood Species: Pine/ Hemlock Timber Framer: Brandon Pipher Project Location: Harpursville NY Complete restoration and relocation of a early to mid 1800’s granary. Frame was kept original (even all granary bins were

Project Information Company: Confluence Fabrication Co. Designer/Architect: Confluence Fabrication Co . Timber Framer: Confluence Fabrication Co. Project Location: Port Townsend, Washington Wood Species: Reclaimed Douglas Fir At the crest of the lavender and rye covered hill, where San Juan and

Project Information Company: Confluence Fabrication Co. Designer/Architect: Confluence Fabrication Co . Timber Framer: Confluence Fabrication Co. Project Location: Worthington, Pennsylvania Wood Species: Mixed Oak This frame has to meet the challenge of a number of varied uses that include a

Project Information Company: Blair Edwards Construction Designer/Architect: Rick Reeves Timber Framer: Cameron Edwards Project Location: Kansas Wood Species: Douglas Fir We are doing a remodel/addition for our clients. They had us cut 32 wide out the center of their house