It is a common occurrence in a timber framed structure to have two beams meeting at a single post. This can create conflicts with the joinery. A corner joint with screws is one solution to this problem. In order to […]
Corner Joint With Screws Read More »
When you create a hip roof in a timber frame, there are different types of rafters used. The hip rafters (in purple) form the roofline and extend from the plate to the ridge. The jack rafters (in turquoise) connect
Jack Rafter To Hip Read More »
The joinery takes a bit of thinking when you have two beams meeting at a single post. The goal is to create a strong connection and avoid removing too much wood from the lumber. One solution is this corner joint with barrel bolts.
Corner Joint With Barrel Bolts Read More »
Everyone loves a gazebo! But anyone who has built a timber frame gazebo can tell you that the octagonal shape will cause you to create some complex joinery. Take a look at this eight sided corner plate detail sent to us by the team…
Eight Sided Gazebo Corner Plate Read More »
The rafters are housed into the king post. In this example, there is a 1″ housing cut into the post, and the roof load is supported by the bearing surface of the housing. Housings for the all thread rod are notched into the upper part of the rafter and secure into the post
Peak Joinery of Hipped Roof Read More »
Ok, so you’re ready to get started on your project, with a plan, materials list, and tools. However, the most powerful tool you’ll bring to your DIY project is your brain, with its enthusiasm, curiosity, and desire to expand your
Tidbits – The Rules of Timber Joinery Design Read More »
This dramatic joinery combination hails from temples and structures throughout Asia. If you have a four sided structure and need a clear span without the traditional tie beams over head or just want to add a cool feature to a
Dragon Beam With Hip Read More »
The hammer beam truss is more complex than other truss types. It is a beautiful truss, however, and also has the advantage of using shorter pieces of wood. The truss is composed of the hammer beams (red), hammer posts (blue)
Hammer Beam Truss Detail Read More »
During one of my first Timber Framers Guild Conferences, I heard a talk by Vico Von Voss about his various projects. He referred to square timbers as the male form and round timbers as the female form, and that you
Square to Round Timber Joinery Read More »
Using a traditional timber framed floor system which includes a sill plate and joists is becoming rare. However, it is still a great way to create the floor system, depending on your project needs. In this detail a stub tenon is used
Sill Plate to Post Joinery Read More »
More likely than not, the joinery in the roof system of a timber frame is often loaded with tension and so special consideration is needed to make sure everything is held together. In this detail we show a collar tie to rafter connection in two
Collar Tie to Rafter Connection Read More »
Just like last month’s detail this one relies on a conventionally framed wall to support a timber frame rafter, it can also be used to rest a beam on as well. To create the timber frame rafter wall pocket, you nail
Timber Frame Rafter Wall Pocket Read More »