Home » Shop » Timber Frame Plans » Cabin Plans » 30×24 Timber Frame Cabin Plan
30x24 Timber Frame Cabin Plan Isometric
30x24 Timber Frame Cabin Plan Isometric
30×24 Timber Frame Cabin Plan
30×24 Timber Frame Cabin Plan
30×24 Timber Frame Cabin Plan
30×24 Timber Frame Cabin Plan
30×24 Timber Frame Cabin Plan
30×24 Timber Frame Cabin Plan

30×24 Timber Frame Cabin Plan

$87.00

SKU: 25634 Categories: , Tags: ,

Do you have in mind a cabin in the woods, a not-quite-tiny house or a combination workshop/apartment? This generously sized frame opens up a world of possibilities!  The two-level queen post truss frame is flanked by a shed roof, and the combination creates a cabin with charm!  Leave the volume space open, or floor in part of the upper area for a storage loft! The knee wall creates a comfortable ceiling height in the upper area- so you can maximize your square footage by building the 190 square foot loft. If you don’t need the vaulted ceiling, then floor in the entire area for a grand total of about 1050 square feet! And the queen post truss gable ends are set up nicely for your window placement.

  • 667 square feet plus a 190 square foot loft
  • Actual footprint is 28′-11 3/4″ x  22′- 11 3/4″
  • Sturdy 8x post-construction 47-sheet instant-download pdf plans
  • Plans include renderings, plan, elevation and sectional drawings,  and timber and fastener lists
  • Detailed drawings show each cut on every timber

These plans include 3D drawings so you can visualize the end result of your work. We also include a timber list and fastener schedule so there is no guessing when it comes to acquiring your materials or making a budget. We provide you with drawings of every timber, dimensioning out each and every cut- so there is no head-scratching involved! The plan set is formatted in 8/12” x 11” so you can easily print it from home or your neighborhood print shop.

Learn more about this plan at 30×24 Heavy Timber Cabin with Loft

Important Information:

Timber Frame HQ provides plans for construction purposes but does not oversee the construction. The plan purchaser is responsible for assuring the plan meets local codes and regulations. It is the responsibility of the plan purchaser to obtain any and all structural analysis, engineering, and specifications that may be required in the municipality in which it is to be built. Plan purchaser is to verify all lot conditions and measurements before construction. Purchaser is responsible for additional expenses incurred in order to meet local code and engineering requirements.

Customer understands that the following conditions in your specific area may require additional engineering:

  1. Wind / hurricane / tornado
  2. Seismic / earthquake
  3. Heavy snow
  4. Flood potential
  5. Soil instability
  6. Timber Frame Engineering

Customer understands that HVAC, Plumbing & Electrical will not be included in all plans.

When you purchase a set of plans, you are purchasing a limited copyright license for a design giving you the right to build that structure one time at your location. Your copyright license was granted when you paid the purchase fee. You do not have the right to build the design a second time unless you have a signed agreement with Timber Frame HQ. Please note that copyright law protects “derivative works” the same as it protects the original design. That means that making some changes doesn’t make it a new design. We do not allow modifications of our designs by others, without permission. Your copyright license does not allow another professional to represent our design work as their own.

Timber Frame HQ retains all common law, statutory and other reserved rights, including the copyright. This applies even when you have participated in the development of the design to a significant degree.

Specifications

Dimensions

  • 28’-11 ¾” wide by 22’- 11 ¾” long outside of post to outside of post
  • No overhangs on any side
  • Height to Top of Plate 14’-0”
  • Height to Peak of Roof 21’- 0 ⅞” ” with 10:12  Roof Pitch

Timbers

  • Posts –8×8 
  • Ridge –8×10
  • Rafters – 8×10, 6×8
  • Plates – XxX
  • Tie Beams – 8×10
  • Braces – 4×8

Plans

  • 48 pages total
  • Construction Drawings – 47 pages (8 ½ x 11)
  • Timber List – 1page ( 8 ½ x 11)

Customize

We are happy to modify and update the drawings to your specifications. We can adjust the footprint, roof pitch, overhangs, and overall heights. These will eliminate your mistakes in modifying an existing plan to meet your needs.

  • Our design services are $85 per hour. Engineering services are $200 per hour. We have a minimum charge of $500 for our design work.
  • Lengthening (parallel to the main ridge) is more affordable than changing the width or adjusting the roof pitch.
  • Once you have purchased the plans and have reviewed them, please fill out the form below. It will get you into our system, and one of our team members will get back to you with an estimate for our services. Please include any of the following changes to the form’s “Other Project Info” section.
    • Overall width and length that you are after from the outside of the posts.
    • New 2nd Floor Framing Height
    • New KneeWall Frame Height (from 2nd-floor framing height to top of the top plate?
    • New Overhang Dimensions both for the sides and ends?
    • Any adjustments to the Roof Slope?


Fastener Kit

Procuring the hardware for your project is easy with our timber frame parts kit!  Just purchase what you need from Timber Frame HQ with one click!  You don’t need to scrounge around for your pegs or find just the right screws for your rafters and we always throw in some extra just in case. We’ve got you covered! With this kit, you get:

This kit is tailor-made for use with the 30×24 Timber Frame Cabin Plan when constructed as a timber frame structure. The kit does not include any post base hardware, which is also available in the TFHQ shop.

Please allow 3-4 weeks for delivery.

Learn More

30-Day Guarantee

We are so confident that you’ll love the plan, we stand behind it 100% with our 30-Day Money-Back Guarantee. It means you have 30 days to initiate a return with us for any reason.

It’s the best Return and Warranty Policy of any company in the business. You can buy from us with full confidence that we’ll be here to help if something goes wrong, or if the plan just doesn’t end up working out for you.

Return Policy

Our money-back guarantee gives you 30 days to decide whether this plan is everything you hoped for. If for some reason it’s not working out, you can return it for a full refund. Here’s how that works:

Email us within 30 days of placing your order. We will refund you the full purchase price of this plan.

And remember, if you have any issues whatsoever with your plan, even if you’re not sure you want to return it, please get in touch with us personally. We want you and every other Timber Frame HQ customer to have the best possible experience with us.

Please note the 30-Day Guarantee is for individual plan purchases and not for our Timber Frame Plan Bundle or other plan bundles for which we do not offer refunds due to the nature of the product.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Scroll to Top