This is an exploded view of a 2″ tenon and mortise for a knee brace where it connects to a tie beam. The tie beam was rotated so that you can see into the mortise. The layout is 2″ off the face of the brace and then 2″ thick. Same with the mortise. One 1″ […]
This is an exploded view of a brace tenon and it’s mortise. This brace is centered on the tie beam (which has been rotated so you can see into the mortise.) And the brace tenon is centered on the brace. This type of mortise and tenon joint is a little more complex to cut as […]
This is an exploded view of a 3″x5″ knee brace with tenon layout of 1 1/2″ off the face and 1 1/2″ thick, and it’s mortise in a tie beam. The peg is 3/4″ in diameter and it’s placement is 1 1/2″ off the shoulder and 2″ off the bearing end. The tie beam has […]
This picture show some of the names of the knee brace tenon. This tenon is either 2″ off the layout face or 1 1/2″ off. Either way the names would be the same.