The fully housed mortise and tenon joint represents a fundamental connection in timber framing that combines the mechanical strength of traditional mortise and tenon joinery with enhanced load-bearing capacity through housing. This joint type creates a dual load path: the […]
Fully Housed Mortise and Tenon Joints Read More »
The Dutch barn style through tenon is a traditional joinery technique designed to resist outward thrust—commonly found in anchor beams of Dutch-style barns that have shaped the New England landscape for centuries.This joint features a through tenon that passes entirely
Through Tenon With a Wedge Read More »
The “1” diminished housing joint is a specific type of mortise and tenon joint used primarily in timber framing. It involves a tenon (the projecting piece of wood) that fits into a mortise (the cavity) cut into another timber. The
Mortise and Tenon With A Diminished Housing Read More »
The wedged mortise and tenon joint is a classic and enduring method in timber framing, known for its strength and durability. This joint consists of a tenon, or tongue, that fits snugly into a corresponding mortise, or cavity, cut into
Wedged Mortise and Tenon Joint Read More »
In this joinery detail we join a post to a beam with a Timberlinx A095 Connector. There is a stub tenon to act as a locator and to ensure you cannot see through the beam and post after the timber
Timberlinx A095 – Post and Beam Connector Read More »
The hammer beam truss is more complex than the other types of trusses, but it allows for larger spans with shorter pieces of timber. Here we will take a look at the joinery of the hammer beam to hammer post in particular.
Hammer Beam to Hammer Post Read More »
The king post truss is one of the most common truss forms used in timber framing. Some, but not all king post trusses utilize struts (diagonal beams coming from the bottom chord).
King Post Top Joinery Read More »
When you have two beams connecting into one post at the same height, you need to get creative in cutting the joints. The goal here is to make a secure connection without taking too much meat and strength out of the post. In this detail we show you how to accomplish that with an Offset Mortise and Tenon.
Offset Mortise and Tenon Read More »
Cross lap joints are a great solution when you want to create clean, continuous lines in a timber frame. The edges of the joint are completely flush, making it almost appear that the timbers are magically connected. To create a cross lap joint, you cut halfway through the width of both timbers that you are connecting , and they slide together into an extremely solid joint.
Looking for a way to cut down on the time it takes you to cut a knee brace, or perhaps you don’t have the tooling to cut all those mortises for the tenons? How would you like a variation that simplifies the cutting but still gives you the strength and look of traditional mortise and tenon joinery?
Post and Beam Knee Brace Connection Read More »
Used primarily on plates and floor systems, this corner joint uses a mortise and tenon on one plate (red) and a tusk tenon on the opposing plate (purple). The opposing plate (purple) gets housed onto the plate for bearing. It
Mortise and Tenon Corner Joint Read More »
There are times that tenons will get in the way of each other, weakening the entire joinery area. This issue can be particularly common on a queen post truss where the tie beam, rafter, and post collide. A double mortise
Double Mortise and Tenon Joint Read More »
