Like all other scarf joints, you can use this joint to create a longer beam out of two shorter timbers. The cogs in this joint are the t-shape projections in the tenon. Since they help lock the joint in place, they also increase the bending strength against horizontal loads.
Stop Bladed Scarf Joint With Cogs and Pegs Read More »
This stop bladed scarf joint with cogs takes a bit more work to cut than a simple bladed scarf joint. But the cogs (the projections into the tenon that form a t-shape) added to the stub tenons help lock the joint in place.
Stop Bladed Scarf Joint With Cogs Read More »
If you need to span a distance greater than your lumber dimensions, scarf joints are the way to go. Another variation on the scarf joint, this stop bladed scarf joint is a half-lap joint with the addition of the stops, also called tongues or blades.
Stop Bladed Scarf Joint Read More »
The half pegged bladed scarf joint is a half-lap joint with the addition of the tongues or blades connecting one beam to the other. The blades add more surface area and create a strong, attractive joint.
Half Pegged Bladed Scarf Joint Read More »
All scarf joints serve the same purpose – to enable you to span a length greater than the the size of your timbers. Any scarf joint effectively creates one long timber from two shorter ones.
Stop Splayed Scarf Joint Read More »
Looking for a way to cut down on the time it takes you to cut a knee brace, or perhaps you don’t have the tooling to cut all those mortises for the tenons? How would you like a variation that simplifies the cutting but still gives you the strength and look of traditional mortise and tenon joinery?
Post and Beam Knee Brace Connection Read More »
Like all other scarf joints, this half lap with table scarf joint gives you the ability to create spans longer than the length of your lumber. Similar to other half lap joints, this one consists of each timber being split longitudinally,
Half Lap With Table Scarf Joint Read More »
When you need a beam longer than the sizes of your lumber, a scarf joint is the way to go. In this attractive half and bridled scarf joint, each beam is split longitudinally and connects to its partner with a mortise on one end and a tenon on the opposite end.
Half and Bridled Scarf Joint Read More »
It is a common occurrence in a timber framed structure to have two beams meeting at a single post. This can create conflicts with the joinery. A corner joint with screws is one solution to this problem. In order to
Corner Joint With Screws Read More »
When you create a hip roof in a timber frame, there are different types of rafters used. The hip rafters (in purple) form the roofline and extend from the plate to the ridge. The jack rafters (in turquoise) connect
Jack Rafter To Hip Read More »
The joinery takes a bit of thinking when you have two beams meeting at a single post. The goal is to create a strong connection and avoid removing too much wood from the lumber. One solution is this corner joint with barrel bolts.
Corner Joint With Barrel Bolts Read More »
Everyone loves a gazebo! But anyone who has built a timber frame gazebo can tell you that the octagonal shape will cause you to create some complex joinery. Take a look at this eight sided corner plate detail sent to us by the team…
Eight Sided Gazebo Corner Plate Read More »