Home » Shop » Timber Frame Plans » Barn Plans » 24×24 Shed Roof Plan with Loft
24x24 Shed Roof Plan with Loft 3D
24x24 Shed Roof Plan with Loft 3D
24x24 Shed Roof Plan with Loft Axonometric
24x24 Shed Roof Plan with Loft Side View
24x24 Shed Roof Plan with Loft Detail
24x24 Shed Roof Plan with Loft Plan Overview Piece Drawings

24×24 Shed Roof Plan with Loft

$97.00

This impressive 24×24 shed roof plan with loft would be suitable for so many different uses!  You get great headroom, up to 10’-4”, in the loft under the shed roof. The main floor has a ceiling height of over 8’ under the loft, and the ceiling soars up to over 16 feet in the open area! With all that space, this frame would make a great garage/workshop, or a contemporary not-so-tiny home. There are lots of opportunities for flooding the space with light, if you choose: the un-lofted exterior wall has an unbroken area over 13 feet high!

  • 576 square feet main level
  • 296 square feet loft
  • 872 total square feet
  • Single-plane roof means less cutting
  • Generous 2 foot overhangs
  • Gentle 3:12 roof pitch
  • Show off your joinery skills with spline and scarf joints

The plans for this 24×24 shed roof plan with loft are chock full of all the information you need to make this a successful project you will be proud to show off! The 13-page construction set has 3D drawings so you can picture the finished frame. We include exploded drawings, both solid and transparent, so you can see how the pieces interact. There are fully dimensioned plan, elevation and section drawings, and details of the critical areas. Then there is the 22-page piece drawing set, which shows every cut on each timber. The pieces have labels that correspond to the construction drawings, so you know exactly how everything fits together. We also include a hardware and peg list, and a timber list, to make your material procurement easier. The plans are instantly downloadable as soon as you make your purchase. They are formatted to print at 11×17 inches for easy reading.

 

Important Information:

Timber Frame HQ provides plans for construction purposes but does not oversee the construction. The plan purchaser is responsible for assuring the plan meets local codes and regulations. It is the responsibility of the plan purchaser to obtain any and all structural analysis, engineering, and specifications that may be required in the municipality in which it is to be built. The plan purchaser is to verify all lot conditions and measurements before construction. Purchaser is responsible for additional expenses incurred in order to meet local code and engineering requirements.

The customer understands that the following conditions in your specific area may require additional engineering:

  1. Wind / hurricane / tornado
  2. Seismic / earthquake
  3. Heavy snow
  4. Flood potential
  5. Soil instability
  6. Timber Frame Engineering

The customer understands that HVAC, Plumbing & Electrical will not be included in all plans.

When you purchase a set of plans, you are purchasing a limited copyright license for a design giving you the right to build that structure one time at your location. Your copyright license was granted when you paid the purchase fee. You do not have the right to build the design a second time unless you have a signed agreement with Timber Frame HQ. Please note that copyright law protects “derivative works” the same as it protects the original design. That means that making some changes doesn’t make it a new design. We do not allow modifications of our designs by others, without permission. Your copyright license does not allow another professional to represent our design work as their own.

Timber Frame HQ retains all common law, statutory, and other reserved rights, including the copyright. This applies even when you have participated in the development of the design to a significant degree.

Scroll to Top