The fully housed mortise and tenon joint represents a fundamental connection in timber framing that combines the mechanical strength of traditional mortise and tenon joinery with enhanced load-bearing capacity through housing. This joint type creates a dual load path: the […]
Fully Housed Mortise and Tenon Joints Read More »
The king post truss is one of the most enduring forms in timber framing, having supported roofs for centuries. At its heart lies a critical connection: where the vertical king post meets the horizontal tie beam. Traditionally, this joint used
King Post to Tie Beam with All-thread and Bolts Read More »
The Dutch barn style through tenon is a traditional joinery technique designed to resist outward thrust—commonly found in anchor beams of Dutch-style barns that have shaped the New England landscape for centuries.This joint features a through tenon that passes entirely
Through Tenon With a Wedge Read More »
The “1” diminished housing joint is a specific type of mortise and tenon joint used primarily in timber framing. It involves a tenon (the projecting piece of wood) that fits into a mortise (the cavity) cut into another timber. The
Mortise and Tenon With A Diminished Housing Read More »
The wedged mortise and tenon joint is a classic and enduring method in timber framing, known for its strength and durability. This joint consists of a tenon, or tongue, that fits snugly into a corresponding mortise, or cavity, cut into
Wedged Mortise and Tenon Joint Read More »
In this joinery detail we join a post to a beam with a Timberlinx A095 Connector. There is a stub tenon to act as a locator and to ensure you cannot see through the beam and post after the timber
Timberlinx A095 – Post and Beam Connector Read More »
One of many tricks of the timber framer’s trade, the timber frame corner joint with spline and a tenon is an great solution to the problem of several timbers coming together at one point.
Timber Frame Corner Joint with Spline and a Tenon Read More »
Jump to: Version 1, Interactive 3d Model, Version 2 This king post with steel all thread uses a bit of hidden modern technology to strengthen the joinery and avoid taking too much “meat” from the timbers. A king post truss
King Post with Steel All Thread Read More »
The hammer beam truss is more complex than the other types of trusses, but it allows for larger spans with shorter pieces of timber. Here we will take a look at the joinery of the hammer beam to hammer post in particular.
Hammer Beam to Hammer Post Read More »
The king post truss is one of the most common truss forms used in timber framing. Some, but not all king post trusses utilize struts (diagonal beams coming from the bottom chord).
King Post Top Joinery Read More »
When you have two beams connecting into one post at the same height, you need to get creative in cutting the joints. The goal here is to make a secure connection without taking too much meat and strength out of the post. In this detail we show you how to accomplish that with an Offset Mortise and Tenon.
Offset Mortise and Tenon Read More »
The stop-splayed scarf joint with sallied abutments is a fun little twist on the standard stop-splayed scarf joint. In this case, the stops are sallied, or angled.
Stop-Splayed Scarf Joint with Sallied Abutments Read More »
