Spline Joinery
When two plates or beams come together into the same plane on a post, there is often not enough thickness in the post for each plate to connect to it with a tenon. If you put a tenon on […]
When two plates or beams come together into the same plane on a post, there is often not enough thickness in the post for each plate to connect to it with a tenon. If you put a tenon on […]
Jump to: Version 1, Interactive 3d Model, Version 2This king post with steel all thread uses a bit of hidden modern technology to strengthen the joinery and avoid taking too much “meat” from the timbers. A king post truss is one
King Post with Steel All Thread Read More »
The hammer beam truss is more complex than the other types of trusses, but it allows for larger spans with shorter pieces of timber. Here we will take a look at the joinery of the hammer beam to hammer post in particular.
Hammer Beam to Hammer Post Read More »
When you have two beams connecting into one post at the same height, you need to get creative in cutting the joints. The goal here is to make a secure connection without taking too much meat and strength out of the post. In this detail we show you how to accomplish that with an Offset Mortise and Tenon.
Offset Mortise and Tenon Read More »
Anyone interested in timber framing should be familiar with Tedd Benson’s first book. Published in 1980, it became the Bible for timber framers, and there’s a lot of useful information. Since then, timber framing has come a long way in terms of the available tools…
Fitting Up A Knee Brace Read More »
Hudson HartHudson J Hart is Co-CEO (along with Mike Larson) of Big Timberworks, Inc., in Gallatin Gateway, Montana. Hudson describes Big Timberworks (or as Hudson calls it, BT) as “a group of talented craftsmen & craftswomen. We enjoy the opportunities
Spotlight: Hudson J Hart and Big Timberworks, Inc. Read More »
The 7.8-amp, 4 3⁄4 inch Makita 9741 wheel sander ramps up to 3,500 RPM and delivers professional-grade timber cleaning and grain raising tasks. The strategic design allows woodworkers to negotiate deep corners as well. Makita didn’t appear to be interested in
Tool Review: Makita 9741 Wheel Sander Read More »
The average do-it-yourselfer may not have a pressing need to fill a cache with a lot of specialized tools, but timber framers and log home builders may want to consider a good chain saw beam cutter. Many pros discover this
Tool Review: Prazi USA PR7000 Beam Cutter for 7-1/4-Inch Worm Drive Saws Read More »
Brad CorkillBrad Corkill is president and owner of Whiteman Lumber Company, in Cataldo, Idaho. The mill was started in 1928 by Harry Whiteman, and is now the oldest continuously-operating sawmill in the state. Whiteman Lumber supplied mining timbers for Sunshine
Spotlight: Brad Corkill and Whiteman Lumber Company Read More »