This rafter to tie beam connection, strong and simple to cut, joins a rafter to a tie beam in a wide variety of truss combinations. The notch is what creates the strength in this connection. It uses the roof pitch […]
Rafter to Tie Beam Connection Read More »
A stop splayed scarf joint is used to create longer timbers for use in plates, beams, rafters and posts when you cannot find a long enough timber to span the distance you require.The stop splayed scarf that is displayed here
Stop Splayed Scarf Joint Read More »
In a hexagonal timber frame where the plates around the perimeter join with the principal rafter, it is a bit tricky from an engineering standpoint. This is just one solution, and in this case, a steel post was used instead
Hexagonal Frame Plate to Rafter Connection Read More »
Just the housings and rafters to cut this boss pin detail would certainly challenge any timber framer. The central post is typically called a boss pin, and it is used when you have several hips and valleys coming together at
Hexagonal Heavy Timber Frame Boss Pin Detail Read More »
While joining a strut from a king post or bottom chord is a simple timber frame joint to cut, it is essential to look at the connection details. In this upper king post strut to rafter detail, we use a 3/4″
Upper King Post Strut to Rafter Detail Read More »
A classic joint for a king post to rafter connection uses a 1 1/2″diminished housing, and because it is designed for oak it uses a 1 1/2″ tenon. This upper king post joinery is a classic and robust connection. As always,
Upper King Post Joinery Detail Read More »
This exploded view is of a king post to tie wedged tenon – a wedged king post tenon in a truss frame from a famous meeting house. The tie is a 12 x 12, and the king post is an
King Post to Tie Wedged Tenon Read More »
This is an exploded view of a king post’s bottom tenon where it goes through a very large tie beam. The king post tenon is secured with pegs into the tie beam. A king post hangs down from two rafters
King Post Tenon Through Tie Beam Read More »
Every timber gets its name from where it is in the frame. This beam is between two posts. It holds them apart from the rafters pushing them in.It is called a “Straining Beam”. Here is an exploded view of one.
