If you need to span a distance greater than your lumber dimensions, scarf joints are the way to go. Another variation on the scarf joint, this stop bladed scarf joint is a half-lap joint with the addition of the stops, also called tongues or blades.
Stop Bladed Scarf Joint Read More »
The half pegged bladed scarf joint is a half-lap joint with the addition of the tongues or blades connecting one beam to the other. The blades add more surface area and create a strong, attractive joint.
Half Pegged Bladed Scarf Joint Read More »
All scarf joints serve the same purpose – to enable you to span a length greater than the the size of your timbers. Any scarf joint effectively creates one long timber from two shorter ones.
Stop Splayed Scarf Joint Read More »
Like all other scarf joints, this half lap with table scarf joint gives you the ability to create spans longer than the length of your lumber. Similar to other half lap joints, this one consists of each timber being split longitudinally,
Half Lap With Table Scarf Joint Read More »
When you need a beam longer than the sizes of your lumber, a scarf joint is the way to go. In this attractive half and bridled scarf joint, each beam is split longitudinally and connects to its partner with a mortise on one end and a tenon on the opposite end.
Half and Bridled Scarf Joint Read More »
Often in larger structures and barns you may need to split your rafters in two due to the overall length of the building. To accomplish this and create a strong member you can use a rafter scarf joint; in this
Rafter Scarf Joint Read More »
In this joinery example, we are detailing two variations of this double tenoned scarf joint. The first uses a hardwood wedge to drive the two pieces together and the other uses pegs. If you want or need a better
Double Tenoned Scarf Joint Read More »
This bladed scarf joint uses pegs to secure the two timbers together. Commonly utilized for either a sill plate or roof plate, if you add some all-thread steel rods or structural screws, it could be used in areas with light
Pegged Bladed Scarf Joint Read More »
Every so often timber framers find themselves needing to lengthen a timber for a post or a rafter and for this they need a special type of scarf joint – a post or rafter scarf joint. The one seen here
Post or Rafter Scarf Joint Read More »
A stop splayed scarf joint is used to create longer timbers for use in plates, beams, rafters and posts when you cannot find a long enough timber to span the distance you require.The stop splayed scarf that is displayed here
Stop Splayed Scarf Joint Read More »