Home » Timber Frame Plans » Barn Plans » 24×36 T-Rex Post and Beam Barn

24×36 T-Rex Post and Beam Barn

Redding Rendering

Are you looking for a plan that combines living or office space above storage for vehicles or equipment? ? Take a look at this 24×36 T-Rex post and beam barn! If you are not up to cutting traditional mortise and tenon joinery, but want the look and durability of heavy timbers, this may be the plan for you. This plan is designed to utilize T-Rex connectors for a simpler cutting job!

 The ground level is one open space, with two 8×8 columns for support. Three nine-foot openings will give you plenty of access for storage, and there is a separate walk door. A total of six windows on this level will bring in plenty of daylight, yet allow room beneath them for workbenches.

On the second level, a knee wall and the 10 in 12 roof pitch increases the ceiling height at the peak to over thirteen feet, so there is a ton of usable space. And a pair of windows on either end creates great cross-ventilation and daylighting.

This plans set is 32 pages and is formatted for instant download.  It is set up to be printed on 11×17 paper that you can have printed at your neighborhood copy shop. We provide you with 3-D renderings so you can understand what you are building. We also include  elevations and sections of each part of the frame, and individual dimensioned piece drawings showing every cut for the metal connectors. A complete timber and fastener list will make your budgeting and material procurement easier. 

Please Note: As these plans were designed by Connext Post and Beam and not Timber Frame HQ, they are NOT included in the Plan Bundle. They are only available for individual purchase.

Redding Photograph
Plan Guarantee

Important Information:

Timber Frame HQ provides plans for construction purposes but does not oversee the construction. The plan purchaser is responsible for assuring the plan meets local codes and regulations. It is the responsibility of the plan purchaser to obtain any and all structural analysis, engineering and specifications that may be required in the municipality in which it is to be built. Plan purchaser is to verify all lot conditions and measurements before construction. Purchaser is responsible for additional expenses incurred in order to meet local code and engineering requirements.

Customer understands that the following conditions in your specific area may require additional engineering:

  1. Wind / hurricane / tornado
  2. Seismic / earthquake
  3. Heavy snow
  4. Flood potential
  5. Soil instability
  6. Timber Frame Engineering

Customer understands that HVAC, Plumbing & Electrical will not be included in all plans.

When you purchase a set of plans, you are purchasing a limited copyright license for a design giving you the right to build that structure one time at your location. Your copyright license was granted when you paid the purchase fee. You do not have the right to build the design a second time unless you have a signed agreement with Timber Frame HQ. Please note that copyright law protects “derivative works” the same as it protects the original design. That means that making some changes doesn’t make it a new design. We do not allow modifications of our designs by others, without permission. Your copyright license does not allow another professional to represent our design work as their own.

Timber Frame HQ retains all common law, statutory and other reserved rights, including the copyright. This applies even when you have participated in the development of the design to a significant degree.

4 thoughts on “24×36 T-Rex Post and Beam Barn”

  1. michael T stewart

    I love the build for many reasons. That would make a great start at my farm for beginning to build my main house. I have a place for it also. One thing I would likely add would be a larger dormer on the south side (opposite the garage doors.

    This would add natural light, plant spaces, warmth and beautiful scenery also.
    Full length built in window seats with alternating bookcases between and on either end.

    great concept!

  2. Hi, Do you supply any foundation details for this building .What is the sill design also can I see from a drawing how the metal connectors work with the timber joints ! ! Thanks Ed

Leave a Comment

Your email address will not be published.

Scroll to Top