Cantilevered Timber Frame Pavilion Plan

$47.00

Description

Take a good look at this beautiful cantilevered timber frame pavilion! The low-pitched roof is supported by two 6” posts, each with two asymmetrical knee braces, leaving plenty of flexible open floor area.   The generous 14 foot by approximately  9 foot cantilevered roof allows for plenty of room for a conversation area, outdoor kitchen, grill station, hot tub shelter or outdoor dining space.  The low pitch cantilever creates an interesting, contemporary addition to your back yard. Cover the purlins with metal, thatch or shingle roofing for protection from the rain, or leave them exposed for a sun screen.

There is plenty of floor area since the two posts are offset from the center of the roof. The strength in the cantilever comes from being sure the posts are secured deep into the ground.If you want to add even more privacy, you can add screening in between the posts and grow some climbing vines.

The plan set contains 19 sheets in a pdf that prints on 8.5″x11″ and includes piece drawings for all the parts in the frame.  We have also included some blown up isometric drawings to help you visualize the joinery better. The drawings are ready for instant download and are easy to run off from your home printer.

Download a Sample Plan

 

 

Plan GuaranteeImportant Information:

Purchaser agrees that the use of the plan is for the construction of one house or frame only*, and that the plan or any part of it will not be reproduced by any means without the written consent of the copyright owner.

Timber Frame HQ provides plans for construction purposes but does not oversee the construction. The plan purchaser is responsible for assuring the plan meets local codes and regulations. It is the responsibility of the plan purchaser to obtain any and all structural analysis, engineering and specifications that may be required in the municipality in which it is to be built. Plan purchaser is to verify all lot conditions and measurements before construction. Purchaser is responsible for additional expenses incurred in order to meet local code and engineering requirements.

Customer understands that the following conditions in your specific area may require additional engineering:

  1. Wind / hurricane / tornado
  2. Seismic / earthquake
  3. Heavy snow
  4. Flood potential
  5. Soil instability
  6. Timber Frame Engineering

Customer understands that HVAC, Plumbing & Electrical will not be included in all plans.
Purchaser agrees that the use of the plan is for the construction of one house or frame only*, and that the plan or any part of it will not be reproduced by any means without the written consent of the copyright owner.

Reviews

There are no reviews yet.

Be the first to review “Cantilevered Timber Frame Pavilion Plan”

Simple Share Buttons