Home » Hand Tools » What is the Best Hand Saw for Timber Framing?

What is the Best Hand Saw for Timber Framing?

When it comes to deciding on a hand saw for timber framing, keep your thinking simple. Hand saws are centuries-old tools and there’s no need to reinvent the wheel, so to speak. Just ask yourself three basic questions. Does it cut straight? Is it functional for your use? And, is it durable? Here are three somewhat unique hand saws you may want to give a long look.

Blade Length

12"

15"

11 4/5"

TPI (Teeth per Inch)

9/6

9

7

Sawing Action

Pull

Push

Pull


Ryoba Hand Saw with Handle

Ernest Hemingway outlined a philosophy in his novel The Sun Also Rises that separates the world into two groups of bullfight lovers, the crowd and the aficionados. The crowd enjoys the sport, spectacle and may even try their hand on an amateur basis. But the aficionados truly know the art and passion of bullfighting. In terms of timber framing, this Japanese-made Gyokucho Noko Giri is for the passionate professional and reinvented using a hand saw for me.

In Japanese, “Ryoba” basically means two sides and “Noko Giri” hand saw. This timber framing hand saw has teeth on both sides of its 0.21-inch thick blade. One side provides rip and the other crosscut teeth. The general rule with these Japanese saws is that the bigger the saw the wider the teeth spacing, which is better for timber framing. On this 12-inch, the crosscut edge enjoys 9 TPI (teeth per inch)  and the rip 6 TPI. Unlike many push saws, you can get both hands on the long, straight handle. The cutting action happens on the draw and this model’s large teeth allow you to make quick work of a 8x timber. The ability to replace dulling blades make it an enviable pro tool that won’t slow you down. Saw owners give the Noko Giri high praise for its effectiveness and dual use. Those new to the Japanese style will need a little practice to work in “reverse” from European-American push saws, but should get the hang of it quickly.

Gyokucho has a renowned reputation for making the finest Japanese-style hands saws and this 12-inch won’t tarnish it one bit. Investing in the quality of a Gyokucho Noko Giri makes good sense for professionals, particularly if you do post and beam work.


Stanley 20-045 15-Inch Fat Max Hand Saw

Stanley Hand Saw for Timber Framing

This Stanley hand saw employs SharpTooth technology for 50-percent faster cuts and its rugged build sports 9 TPI over the 15inch blade. The induction-hardened teeth remain sharp 5 times longer than standard hand saws. Its thick, ergonomically fashioned handle adds comfort and promotes a consistent grip during extended use. Fat Max won’t shy away from any tough or damp timber that requires a straight cut. The blades on this durable saw run 15 percent thicker than conventional saws, which reduces flexing and improves precision.

Fat Max owners give the tool terrific marks. From aggressively cutting 8x timbers to cleaning up tree falls, users say this stout saw handles any job you throw at it. The minor negative about Fat Max is that it makes rough, rather than fine cutslike the  In its defense, the saw was designed mainly for rough cuts not finish work.

This hand saw does everything timber framer require. It makes straight cuts, has a functional design and enjoys excellent durability. Stanley has been around for more than 150 years and this 15-inch hand saw will only buoy its hand tool reputation.


Silky 102-30 GOMTARO 300mm Straight-blade Lightweight Saw with Scabbard

Silky Hand Saw for Timber Framing

This Silky can double as a timber saw and landscaping tool. It features a coarse 7 TPI, 11 4/5-inch, full-tang blade and weighs in at a lightweight .6 pounds. The handy scabbard attaches to your tool belt and features a clip for quick removal. This makes it a good, safe tool for on-the-go jobs. It features a pistol-style, rubberized handle and is tremendously effective at fast-cutting small timbers and limbs. One of the excellent aspects of this Silky is that the full-tang blade can be swapped out just by unscrewing two bolts.

Most tool owners give this well-balanced Japanese saw high marks for arborist work but it is great for work in the shop. Outdoors people and survivalists fancy its razor-fast cutting ability and belt-fastening convenience.

For timber frame workers, this Silky may be a nice additional to the tool arsenal for making quick notches and cuts in awkward to reach areas. It also travels up and down ladders well. However, the long blade doesn’t enjoy the firmness for precision work.

Overall, the Silky 102-30 GOMTARO provides a unique level of excellence for working on your timber frame and comes in handy on job sites.

Please note:
Timber Frame HQ is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn advertising fees by advertising and linking to amazon.com. When you purchase something from Amazon, a small percentage of the sale goes to support the efforts of TFHQ.

5 thoughts on “What is the Best Hand Saw for Timber Framing?”

  1. Best saw for timber framing is an old (antique) Simmonds. Appropriately tuned, filed and set. Two saws should do for a lifetime. That’s if the framer is doing most of his work with power tools.

  2. Thanks for your comment, assuming your two saws would include a rip and cross cut? I have a couple older Stanleys and one Simmonds but ever since I picked up the japanese style saws they are just collecting dust…perhaps I need to break them out and give them a fresh start.

  3. Yes 1 x cut and one rip. I have a number of Japanese saws but don’t find that I prefer them. I use them in my shop for smaller work though. Quality western saws can be easily found and with a small amount of work they’re excellent.

    I actually find it harder to source a decent file to sharpen them.

    Nothing against Japanese saws though. I’ll use mine more fequently and see if my -go to- changes.

    Scott

  4. I use the Japanese saws as well as the Stanley. I use them about equal in timber framing. I seem to prefer the Ryoba more for cross cutting (particularly when finishing the last bit of the cut my circular saw can’t reach as I feel it gives my a more precise finish on the end grain on the good side of the kerf) and the Stanley for ripping. I’m sure the Ryoba would work as well on rips, but I prefer the stiffness of the fat max for things like ripping tenon cheeks. I have considered trying the Silky, but it seems like a more aggressive tooth pattern and what I have works real well. Having said all that, these saws are all very reasonably priced as compared to nearly everything else in my shop so you won’t go broke buying all three.
    Rob
    Big Beams Timber Frames

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top